Pontoon Boat Plans
The build is progressing well, an I apologise for getting behind on the blog, but I thought it might be neat to sum up some of the tricks Ive been playing with in an attempt to keep the project on schedule. With a detailed Rhino model as a reference, its been amazingly efficient to print or CNC cut templates for all sorts of jobs at 1:1, eliminating the need for double-handling of measurements and reducing the potential for certainty of operator error. If only you could make buildings this way, it would save all that time making 2d drawings from the 3d model, only to have them poorly re-interpreted back into a 3d building! Here we go from 3D model to 3D boat.
For a start, it has been fortunate that the Alpha hull is incredibly close to the original digital shape. John Gilmour did a nice job with the mould, and I guess would have used CNC to cut out the stations from his initial model. Im benefiting from his hard work now, with the female moulded deck, foredeck and wing fairings mating onto it with only minor swearing and banging.
All the internal bulkheads were hand cut from carbon flat panel, guided by templates that I created in rhino using the section command. I made an allowance in the drawing for the thickness of the shell, and just followed the line with the jigsaw. They all fitted perfectly first go after an hours work, a big time saver compared to the last boat.
To align the wingbars, a traditionally painful job, I cut a couple of templates from some scrap MDF on the CNC. They eliminated all the guess work in setting up the wings, it was almost too easy. You can see how perfectly the template mated to the CNC cut deck. In the end though when I eyeballed the wings, I decided that they needed to be a bit steeper, so I propped up the templates off the deck a bit to get that to work. I guess its always a bit of a surprise when you see the real thing having understood it on the screen, and you have to trust that you can make judgements in real life too. I had to then adjust the CAD model to reflect those changes so that the tramps would still fit!
Another job that was painful last time was doing all the tube copings. There are coping calculators around that would have helped me before with the round tubes, but with a few foil sections in the mix, that becomes a bit problematic as well. The solution was to model the exact sections in Rhino, intersect them and the use the smash command to unwrap the surface into a flat piece. Then you have a template that you can just print out, wrap around the tube and cut.
A few assorted pics below:
For a start, it has been fortunate that the Alpha hull is incredibly close to the original digital shape. John Gilmour did a nice job with the mould, and I guess would have used CNC to cut out the stations from his initial model. Im benefiting from his hard work now, with the female moulded deck, foredeck and wing fairings mating onto it with only minor swearing and banging.
All the internal bulkheads were hand cut from carbon flat panel, guided by templates that I created in rhino using the section command. I made an allowance in the drawing for the thickness of the shell, and just followed the line with the jigsaw. They all fitted perfectly first go after an hours work, a big time saver compared to the last boat.
To align the wingbars, a traditionally painful job, I cut a couple of templates from some scrap MDF on the CNC. They eliminated all the guess work in setting up the wings, it was almost too easy. You can see how perfectly the template mated to the CNC cut deck. In the end though when I eyeballed the wings, I decided that they needed to be a bit steeper, so I propped up the templates off the deck a bit to get that to work. I guess its always a bit of a surprise when you see the real thing having understood it on the screen, and you have to trust that you can make judgements in real life too. I had to then adjust the CAD model to reflect those changes so that the tramps would still fit!
Another job that was painful last time was doing all the tube copings. There are coping calculators around that would have helped me before with the round tubes, but with a few foil sections in the mix, that becomes a bit problematic as well. The solution was to model the exact sections in Rhino, intersect them and the use the smash command to unwrap the surface into a flat piece. Then you have a template that you can just print out, wrap around the tube and cut.
A few assorted pics below:
Do you find information about Pontoon Boat Plans are you looking for? If not, below may help you find more information about the Pontoon Boat Plans. Thank you for visiting, have a great day.
With a house for sale, and spending time getting the place tarted up a bit havent had the time to use the boat,
Went for a fish on Friday with the plan of getting some squid and kingfish. Ive only had a few short session
.jpg)
