Boat Trailer Plans Australia
went out today for a few hours to test the new modifications. conditions were like 3 to 12kts. anything above about 8 i was foiling, though probably needed 10 to go upwind and downwind propperly. everything worked well, no breakages, nothing moved at all. didnt capsize or crash, but i was playing it pretty safe. tried a foiling tack and almost threw myself off the back corner of the wing, holding onto the tramp lacing with my feet. it turns much quicker on foils!
The linkages work much better, and the rudder adjutment in particular is a massive step up from what i had. the wand vibrates when going slow, which is annoying, so ill take to it with the grinder and make it flatter on one side. also thinking about a flat surface on the end, so that not as much of it drags in the water.
i need a new sail.
im not quite happy with the angle of the centreboard. i noticed that i had the rudder trimmed back, flap up about 5 degrees, to the point where half the time it was actually pulling the transom down; you could see because the top gudgeon was touching the top of the gantry, rather than there being a small gap. seems to me the rudder foil could be smaller. before i go cutting stuf im going to make an F-box of sorts, a contraption that lets me adjust the rake fo the centreboard over about 5 degrees on the fly. also i want to put a small bulb at the T joint of the centreboard, to hide a wad of carbon uni that i will wrap around the leading edge at the T. the crack didnt get any bigger, but im not going to risk breaking this foil. so theres 2 or 3 projects to keep me busy(er).
Do you find information about Boat Trailer Plans Australia are you looking for? If not, below may help you find more information about the Boat Trailer Plans Australia. Thank you for visiting, have a great day.
0 komentar:
Posting Komentar